1、 Regular cleaning

Cleaning cycle: The cleaning cycle should be determined based on the usage environment and the properties of the filter material. It is generally recommended to clean at least once a month, and the cleaning frequency can be increased if necessary.

Cleaning steps:

Close the pipeline and remove the filter.

Remove the filter element, mesh and other components inside the filter.

Use clean water or neutral detergent for cleaning, avoid using cleaning agents with strong acidity or alkalinity to prevent damage to the filter.

After cleaning, rinse the filter thoroughly with clean water to ensure that there are no residual impurities or dirt inside.

Reinstall the cleaned filter components back to their original position.

2、 Replace the filter element

Replacement cycle: The replacement cycle of the filter depends on the usage and operating environment of the filter. It is generally recommended to replace it regularly according to the manufacturer's guidance or based on the actual condition of the filter.

Replacement steps:

Close the pipeline and remove the filter.

Remove the old filter element and replace it with a new one that meets the requirements according to the model of the filter.

Install the new filter element inside the filter and ensure a secure installation.

Reinstall the filter back to its original position.

3、 Inspection and maintenance

Sealing inspection: Regularly check the sealing performance between various components of the filter to ensure no leakage issues. If poor sealing is found, the sealing components should be replaced or repair measures should be taken in a timely manner.

Filtering effect monitoring: Regularly check the filtering effect of the filter to ensure that the filtering accuracy and efficiency meet the requirements. If a decrease in filtration efficiency is found, the filter element should be checked and replaced in a timely manner.

Anti corrosion measures: Although stainless steel itself has good corrosion resistance, additional anti-corrosion measures need to be taken in specific environments (such as strong acids, strong bases, or media containing chloride ions), such as coating the surface of stainless steel with protective coatings.

4、 Operation precautions

Avoid impact and collision: Stainless steel precision filters should be protected from impact and collision during use to prevent damage to the filter.

Follow manufacturer's instructions: When installing and operating filters, strictly follow the manufacturer's instruction manual to avoid damage to the equipment caused by excessive pressure or inappropriate fluid types.

Keep the surrounding environment clean: Keep the environment around the filter clean to prevent impurities and dust from entering the interior of the filter, which can affect the filtration effect and equipment life.

5、 Record and maintain history

Establish detailed maintenance records, including filter replacement time, cleaning date, maintenance measures, maintenance personnel, and other information. This helps to promptly identify problems and analyze maintenance effectiveness, providing reference for subsequent maintenance and improvement.

By regularly cleaning, replacing filter cartridges, inspecting and maintaining, and following operating precautions, the long-term stable operation and efficient filtration of stainless steel precision filters can be ensured.